Assessment of Moisture Susceptibility for Asphalt Mixtures Modified by Carbon Fibers
نویسندگان
چکیده
منابع مشابه
Evaluating the Effect of Lucobit on Moisture Susceptibility and Mechanical Performance of Bitumen and Asphalt Mixtures
The use of polymer in hot mix asphalt production has remarkably in recent decades. Destruction due to moisture in hot mix asphalt is of basic matters about flexible pavement durability. In recent decades different ways have been used to evaluate moisture Sensitivity of HMA which some of them are simple with low cost and some are complicated with more reliable results. In this research the effec...
متن کاملEffects of Waste Fibers Stabilizers on the Draindown and Moisture Damage Sensitivity Properties of SMA Mixtures
Waste fibers produced from manufacturing processes are a byproduct commonly deposited in storing yards and/or landfills and thus results in many serious environmental problems in Iran. If these waste materials could be advantageously put to practical use in any application, it would reduce the burden on the environment and landfills. This paper compares the performance of the stone matrix aspha...
متن کاملapplication and construction of carbon paste modified electrodes developed for determination of metal ions in some real samples
ساخت الکترودهاِی اصلاح شده ِیکِی از چالشهاِی همِیشگِی در دانش شیمِی بوِیژه شیمِی تجزیه مِی باشد ،که با در نظر گرفتن سادگِی ساخت، کاربردی بودن و ارزان بودن روش مِی توان به باارزش بودن چنِین سنسورهاِی پِی برد.آنچه که در ادامه آورده شده به ساخت و کاربرد الکترودهاِی اصلاح شده با استفاده از نانو ذرات در اندازه گِیرِی ولتامترِی آهن وکادمِیم اشاره دارد. کار اول اختصاص دارد به ساخت الکترود خمِیر کربن اصلاح شده با لِیگاند داِ...
15 صفحه اولPerformance Evaluation of Dynamic Modulus Predictive Models for Asphalt Mixtures
Dynamic modulus characterizes the viscoelastic behavior of asphalt materials and is the most important input parameter for design and rehabilitation of flexible pavements using Mechanistic–Empirical Pavement Design Guide (MEPDG). Laboratory determination of dynamic modulus is very expensive and time consuming. To overcome this challenge, several predictive models were developed to determine dyn...
متن کاملThe Effect of Carbon Nano-tube on the Fatigue Life of Asphalt Mixtures
The fatigue cracks are observed in asphalt surfaces much more than ruts. This paper deals with the influence of carbon nano-tube on the fatigue life of asphalt mixtures. These samples are made up of the slabs cut by the asphalt cutting saw. Fatigue beams contain 0, 0.3, 0.6, 0.9, 1.2, and 1.5 percent of Carbon Nano-tube. The fatigue experiment was conducted using a 4-point semi-sinusoidal loadi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil Engineering Journal
سال: 2020
ISSN: 2476-3055,2676-6957
DOI: 10.28991/cej-2020-03091472