ASSESSMENT OF THE TECHNICAL CONDITION OF THE BUILDING USING MODERN GEODESIC INSTRUMENTS

The article is devoted to the topic of a comprehensive survey engineering structures that are in operation. It has been established with help visual assessment it impossible give reliable current state structure. Modern geodetic instruments significantly expand capabilities engineers for technical control, therefore, article, special attention paid this type work. carried out on example building was erected according block space-planning scheme. planning scheme based separate blocks different heights and sizes. This reason considering sequence performing object. In course survey, work their joints between each other, deviations from design solutions standards were established, an analysis spatial position project standard indicators out. To clarify foundations establish compliance data, pits made places regulated by terms reference. combined way depth laying foundations. According results laser scanning, executive diagrams recorded. Scanning three blocks. assess boundary normative indicators, scanning planned building's supporting performed. Based tacheometric do not meet requirements regulatory documents proper fastening other disregard conditions ensuring rigidity structures, which can lead decrease overall frame cause excessive deformations. Deviations also multiple limiting parameters normalized regulations, reduce stability frame, contribute appearance additional, unforeseen loads increase risk structural failure negatively affect level reliability. research, concluded use modern electronic control. Keywords: devices, construction, measurement, solutions, reliability, operational condition, assessment,