Assist Control for Finishing Process Considering a Material Removal Rate
نویسندگان
چکیده
منابع مشابه
Effects of process parameters on material removal rate in WEDM
Purpose: In this paper, the effects of various process parameters of WEDM like pulse on time (TON), pulse off time (TOFF), gap voltage (SV), peak current (IP), wire feed (WF) and wire tension (WT) have been investigated to reveal their impact on material removal rate of hot die steel (H-11) using one variable at a time approach. The optimal set of process parameters has also been predicted to m...
متن کاملForce Sensorless Power Assist Control for Wheelchairs Considering Caster Effects
Power Assist Wheelchair (PAW) has being developed for users and caregivers in current high aging society. As a human-machine system, it is important for PAW to sense the human force and operation. In this paper, a Disturbance Observer (DOB) based force estimator is applied to PAW to estimate external forces including the human force, the rolling resistance and the sliding resistance. The rollin...
متن کاملEfficiency of SBR Process with a Six Sequence Aerobic-Anaerobic Cycle for Phosphorus and Organic Material Removal from Municipal Wastewater
Background: Various chemical, physical and biologic treatment methods are being used to remove nitrogen and phosphorus from wastewater. Sequencing batch reactor (SBR) is a modified activated sludge process that removes phosphorus and organic material from sanitary wastewater, biologically. Methods: This study was conducted in 2016.The performance of an aerobic-anaerobic SBR pilot device, locat...
متن کاملOptimization of Process Parameters on Material Removal Rate through Electro Discharge Machining
Among all non-conventional micro-machining, electrochemical discharge machining (ECDM) is having high quality of material removal rate with zero residual stress. This machining has been accepted as a highly modern technology in micromachining. In this paper an effort has been done on micro drilling of glass using electrochemical discharge machining (ECDM). A fixed tool and a step down transform...
متن کاملEconomic design of x¯ control charts considering process shift distributions
Process shift is an important input parameter in the economic design of control charts. Earlier x control chart designs considered constant shifts to occur in the mean of the process for a given assignable cause. This assumption has been criticized by many researchers since it may not be realistic to produce a constant shift whenever an assignable cause occurs. To overcome this difficulty...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2011
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.77.3058