Asymmetrical Magneto-Impedance Effect in an Amorphous Wire with a Coil

High-rate deposition of amorphous silicon films using hot-wire CVD with a coil-shaped filament

To reduce the manufacturing cost of amorphous silicon (a-Si:H)-based photovoltaic devices, it is important to deposit highquality a-Si:H and related materials at a high deposition rate. To this end, we designed and constructed a hot-wire deposition chamber with a coiled filament design and with multiple gas inlets. The process gas could be directed into the chamber through the filament coil and...

A Magnetic Sensor with Amorphous Wire

Using a FeCoSiB amorphous wire and a coil wrapped around it, we have developed a sensitive magnetic sensor. When a 5 mm long amorphous wire with the diameter of 0.1 mm was used, the magnetic field noise spectrum of the sensor was about 30 pT/ÖHz above 30 Hz. To show the sensitivity and the spatial resolution, the magnetic field of a thousand Japanese yen was scanned with the magnetic sensor.

Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts

Magneto-transport Spectroscopy on a Quantum Wire

One-dimensional structures are expected to show unique electronic transport behavior as a consequence of the Coulomb interaction between carriers. A considerable number of theoretical predictions remain largely untested by experiment due to a lack of a suitable one-dimensional wire. Using a new crystal growth technique a unique tube-like structure with a cross section of 25 nm x 25 nm has been ...

Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire

Current experimental investigation deals with the effects of asymmetrical rolling parameters on the inhomogeneity, microstructure, mechanical, and geometrical properties of rolled brass wire. Toward this end, a roll machine with three different roll radii ratios was set up. The asymmetrical conditions are arranged using three different sets of rolls with different diameters that result into dif...