Augmentation of EFB Fiber Web by Nano-Scale Fibrous Elements
نویسندگان
چکیده
منابع مشابه
Synthetic nano-scale fibrous extracellular matrix.
Biodegradable polymers have been widely used as scaffolding materials to regenerate new tissues. To mimic natural extracellular matrix architecture, a novel highly porous structure, which is a three-dimensional interconnected fibrous network with a fiber diameter ranging from 50 to 500 nm, has been created from biodegradable aliphatic polyesters in this work. A porosity as high as 98.5% has bee...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملThe Influence of Fiber Crimp on Acoustic Performance of Polypropylene Fibrous Batt
This paper reports on the effect of fiber crimp frequency on sound absorption capability of staple polypropylene nonwoven batts. Stuffer box was used to impart crimp to spun tow. Crimping of the tow renders the fibers the required textile applicability. In this work, polypropylene batts composed of staple fibers with linear densities of 9, 14, and 18 denier were employed. Three crimp frequency ...
متن کامل3-D Nano-Fiber Manufacturing by Controlled Pulling of Liquid Polymers using Nano-Probes
In-addition to the applications of imaging and characterization, proximal probes are proposed to be used as three-dimensional (3-D) nano-scale manufacturing tools in this paper. Commercially available Atomic Force Microscope (AFM) systems are mainly limited to 1-D or 2-D manipulation tasks, and advanced 3-D nano-manufacturing applications are not possible. Therefore, this paper proposes 3-D nan...
متن کاملEvaluating the Connectivity of Self-Assembled Networks of Nano-scale Processing Elements
Architectures built using bottom-up self-assembly of nanoelectronic devices will need to tolerate defect rates that are orders of magnitude higher than those found in current CMOS technologies. In this paper, we describe and evaluate an approach to provide defect isolation in such an architecture that consists of a large number of simple computational nodes, each of which can communicate with f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Research
سال: 2013
ISSN: 1662-8985
DOI: 10.4028/www.scientific.net/amr.832.494