Augmentation of Fluid Flow and Heat Transfer Characteristics in corrugated Channel: A Review Study
نویسندگان
چکیده
منابع مشابه
Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells
In this study, a periodic zigzag channel with rectangular cross-section has been used in order to obtain a high-efficiency system for cooling a polymer electrolyte fuel cell. An appropriate function of fuel cells and enhancement of their lifetime require uniform temperature conditions of around 80°C. On the other hand, due to volume and weight constraints, a low-density compact heat exchanger i...
متن کاملNumerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel
The influence of variation in rib-height to channel-height ratio (e/H) on the heat transfer and pressure drop characteristics inside a channel with corrugated upper and lower plates was investigated numerically in the present study. The governing equations were solved by using finite volume approximations for a wide range of (0.06 < e/H < 0.26) and Reynolds numbers (5400 < Re < 23000), with a m...
متن کاملFluid flow and heat transfer characteristics in a curved rectangular duct using Al2O3-water nanofluid
In the present research, the laminar forced convective heat transfer and fluid flow characteristics for Al2O3-water nanofluid flowing in different bend (i.e., 180o and 90o) pipes have been investigated numerically in a three-dimensional computational domain using the finite volume technique. The effects of different pertinent parameters, such as the Reynolds number of the duct, volume fraction ...
متن کاملPrediction of Fluid Flow and Heat Transfer Characteristics Behind a Single Backward-Facing Step
Numerical solutions based on standard finite volume method are presented for the study of heat transfer and fluid dynamic characteristics in turbulent flows behind a single sided backward-facing step. The calculation of the differential equations is performed using SIMPLE algorithm. For the turbulent quantities standard K-model is used. Predicted mean velocity profiles and reattachment lengths ...
متن کاملNumerical study of fluid flow and heat transfer in a gas-tank water heater
Influence of a vent hood at the exit of exhaust flue gas and flue baffles in the firetube on the temperature and flow fields of a gas tank water heater, as well as thestructure and amount of heat transferred to the water tank has been studiednumerically using two-dimensional steady state finite element simulation.Observations show that without a vent hood, there is a downward gas flow in theflu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Diyala Journal of Engineering Sciences
سال: 2021
ISSN: 2616-6909,1999-8716
DOI: 10.24237/djes.2021.14104