Austenite Decomposition and Precipitation Behavior of Plastically Deformed Low-Si Microalloyed Steel
نویسندگان
چکیده
منابع مشابه
Isothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملMagnetic Hysteresis and Barkausen Noise in Plastically Deformed Steel Sheets
The magnetic properties of steels are affected by plastic deformation, because the domain wall processes magnetoelastically interact with the dislocations and the residual stresses. The evolution of the magnetic hysteresis loop and its parameters with the type and degree of straining can thus provide a macroscopic signature of the underlying the mechanical and structural properties. Additional ...
متن کاملAmorphous Si TFTs on Plastically-Deformed Spherical Domes
There is a growing interest in the design and fabrication of flexible and rugged electronics particularly for large-area displays and sensor arrays. In this work, we describe the fabrication of amorphous silicon (a-Si:H) thin film transistors (TFTs) on a Kapton substrate which can be permanently deformed into a spherical cap shape. This level of strain would crack uniform a-Si:H device films. ...
متن کاملMODELLING OF KINETICS OF AUSTENITE-TO-ALLOTRIOMORPHIC FERRITE TRANSFORMATION IN 0.37C–1.45Mn–0.11V MICROALLOYED STEEL
The present paper is concerned to the theoretical and experimental study of the growth kinetics of allotriomorphic ferrite in medium carbon vanadium-titanium microalloyed steel. A theoretical model is presented in this work to calculate the evolution of austenite-to-allotriomorphic ferrite transformation with time at a very wide temperature range. At temperatures above eutectoid temperature, wh...
متن کاملInfluence of Boron on Initial Austenite Grain Size and Hot Deformation Behavior of Boron Microalloyed Steels
The initial austenite grain size of boron microalloyed steel with three different amounts of boron (20, 40, and 60 ppm) was investigated under different heating temperatures (1150, 1100, and 1050 °C), and hot compression tests of samples in a wide range of temperature (900–1100 °C) and strain rate (0.1–10 s−1) were conducted. It was found that the initial austenite grain size increases with inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2018
ISSN: 2075-4701
DOI: 10.3390/met8121028