Austenitic Biomaterial Cracks Evaluation by Advanced Nondestructive Techniques
نویسندگان
چکیده
منابع مشابه
Nondestructive Characterization by Advanced Synchrotron Light Techniques: Spectromicroscopy and Coherent Radiology
The advanced characteristics of synchrotron light has led in recent years to the development of a series of new experimental techniques to investigate chemical and physical properties on a microscopic scale. Although originally developed for materials science and biomedical research, such techniques find increasing applications in other domains - and could be quite useful for the study and cons...
متن کاملSQUIDs and Inverse Problem Techniques in Nondestructive Evaluation of Metals
Superconducting Quantum Interference Devices coupled to gradiometers were used to detect aws in metals. We detected aws in aluminum samples carrying current, measuring elds at lift-o distances up to one order of magnitude larger than the size of the aw. Con gured as a susceptometer we detected surface-braking aws in steel samples, measuring the distortion on the applied magnetic eld. We also us...
متن کاملNondestructive Evaluation Techniques for Silicon Carbide Heat-Exchanger Tubing
The adequacy of various nondestructive evaluation (NDE) techniques for inspecting silicon carbide heat-exchanger tubing is discussed .. These methods include conventional ultrasonics, acoustic microscopy, conventional and dye-enhanced radiography, holographic interferometry and infrared scanning techniques. On the basis of current test results and an examination of the discussions in available ...
متن کاملNondestructive Evaluation of Closed Cracks Using an Ultrasonic Transit Timing Method
In this study, we investigated a method for the non-destructive detection of cracks based on an ultrasonic transit timing method. This method is considered to be an effective means for crack monitoring over an extensive coverage area. Aluminum specimens were prepared with a range of crack sizes and subjected to a tone burst wave to investigate the relationship between crack depth and the transi...
متن کاملEvaluation of the Austenitic Grain Growth by Thermoelectric Power Measurements
The influence of the deformation grade on the recrystallised grain size has been studied in the AISI 304 stainless steel. Therefore, cold rolled samples of this material with reductions varying between 30% and 80% were annealed at different temperatures and subsequently quenched. The mean austenitic grain sizes were measured and compared. Moreover, the correlation between the variation of the t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Electrical and Electronic Engineering
سال: 2017
ISSN: 1804-3119,1336-1376
DOI: 10.15598/aeee.v15i2.2186