Automated Quality Assessment of Interferometric Ring Laser Data
نویسندگان
چکیده
منابع مشابه
Automated Data Quality Assessment of Marine Sensors
The automated collection of data (e.g., through sensor networks) has led to a massive increase in the quantity of environmental and other data available. The sheer quantity of data and growing need for real-time ingestion of sensor data (e.g., alerts and forecasts from physical models) means that automated Quality Assurance/Quality Control (QA/QC) is necessary to ensure that the data collected ...
متن کاملQUALITY ASSESSMENT OF INTERFEROMETRIC SAR DEMs
A new interferometric SAR (InSAR) procedure for DEM generation was employed to generate different DEMs from ERS SAR image pairs. The procedure was validated comparing the InSAR DEMs with a suited reference DEM. In the first part of the paper the principal features of the procedure are briefly summarised. The second part is focused on the quality assessment of the InSAR DEMs. They cover the same...
متن کاملA Quality Assessment of Airborne Laser Scanner Data
A Toposys-1 airborne laser scanner (ALS or LIDAR) measurement campaign was arranged in June 2000 (Kalkkinen) and another campaign with helicopter-borne TopEye laser scanner was arranged in September 2002 in southern Finland (Masala, Otaniemi). The Toposys flying altitudes were about 400 and 800 m above ground and for the TopEye, 100, 200, 400 and 550 m flying altitudes were used. Reference meas...
متن کاملStudy of Spatial Data Quality Elements and VGI Linear Data Quality Assessment Methods
Volunteered Geographic Information has provided a rich and valuable resource for spatial data in a variety of applications. Despite the many benefits, this information does not provide any guarantee for their quality. So far, there are several methods to determine the quality of VGI. In addition to introducing quality elements and their evaluation methods, the present study attempts to explore ...
متن کاملQuality Assessment of Dtm and Orthophoto Generated by Airborne Laser Scanning System Using Automated Digital Photogrammetry
The approach of using an airborne laser scanning for DTM generation has made great progress recently. However, it is not always clear the reliability and the quality of the geometry that characterise the generated DTM. Thus, a special test was conducted to assess the quality and the reliability of the generated DTM via an airborne laser scanning system. To perform this test, an airborne laser s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2021
ISSN: 1424-8220
DOI: 10.3390/s21103425