Automatic Detection of Fractures during Tensile Testing Using Vibroacoustic Sensors
نویسندگان
چکیده
منابع مشابه
automatic verification of authentication protocols using genetic programming
implicit and unobserved errors and vulnerabilities issues usually arise in cryptographic protocols and especially in authentication protocols. this may enable an attacker to make serious damages to the desired system, such as having the access to or changing secret documents, interfering in bank transactions, having access to users’ accounts, or may be having the control all over the syste...
15 صفحه اولAbnormal Plastic Behavior of Fine Grain Mp35n Alloy During Room Temperature Tensile Testing
In this paper, results of an investigation on the strain hardening responses of superalloy MP35N with two average grain sizes of 38 and 1 μm, during room temperature tensile testing are reported. The microstructural evolution of the deformed samples was studied using optical and transmission electron microscopy (TEM) techniques. The strain hardening behavior of the 38 μm material was rather sim...
متن کاملIn Situ Thermographic Imaging of Shear Bands During Tensile Testing
Uniaxial tensile tests were conducted on a Zr-based bulk metallic glass (BMG) with a nominal composition of Zr52.5Cu17.9Ni14.6Al10.0Ti5.0 (at.%). An infrared (IR) camera was utilized in situ during tensile testing to observe shear band evolution and fracture in the BMG. This unique visualization technique revealed that the temperature along the axis of shear band propagation constantly decrease...
متن کاملDetection of Looping During Colonoscopy Using Bending Sensors
During colonoscopy, looping of the colonoscope shaft is considered one of the biggest challenges of the procedure. It hinders the advancement of the distal tip of the colonoscope requiring time to retract and straighten the shaft. Consequently, anesthesia exposure and operative time, and associated risk and cost are all increased. Many active and passive auxiliary devices have been introduced t...
متن کاملMechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process
Terms of service of the steels with retained austenite in the microstructure, is severely depended on the stability of austenite during the course of deformation. The present work aims to evaluate the mechanical stability of austenite in nanostructured, carbide free bainitic steels during tensile testing and cold rolling process. To achieve the microstructure with retained austenite, the steel ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings
سال: 2016
ISSN: 2504-3900
DOI: 10.3390/ecsa-3-p001