Average Austenite Grain Size Evolution During Multi-pass H-shape Metal Rough Rolling Process
نویسندگان
چکیده
منابع مشابه
STRAIN INDUCED AUSTENITE-TO-FERRITE TRANSFORMATION BEHAVIOR OF PLAIN CARBON STEELS THROUGH SINGLE PASS ROLLING
In principal, a proper combination of strength and ductility is achieved through micro component refinement in steels. This is particularly empowered with ferrite refinement down to micron sizes in ferrite pearlite engineering steels. The latter is achieved through various well-defined methods in which strain induced transformation (SIT) has shown spectacular capabilities. In the present study,...
متن کاملMechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process
Terms of service of the steels with retained austenite in the microstructure, is severely depended on the stability of austenite during the course of deformation. The present work aims to evaluate the mechanical stability of austenite in nanostructured, carbide free bainitic steels during tensile testing and cold rolling process. To achieve the microstructure with retained austenite, the steel ...
متن کاملA Novel Optimization Approach Applied to Multi-Pass Turning Process
Optimization of turning process is a non-linear optimization with constrains and it is difficult for the conventional optimization algorithms to solve this problem. The purpose of present study is to demonstrate the potential of Imperialist Competitive Algorithm (ICA) for optimization of multipass turning process. This algorithm is inspired by competition mechanism among imperialists and coloni...
متن کاملAustenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels
In the present study, the effect of grain size on the austenite stability was studied by nanoindentation tests in a 304L stainless steel. Thermomechanical processing based on cold rolling and annealing was used to produce two different types of austenite: ultrafine grained (UFG) austenite with the average grain size of 0.65 μm and coarse grained (CG) austenite with the average grain size of 12 ...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Environment, Energy and Earth Sciences
سال: 2018
ISSN: 2475-8833
DOI: 10.12783/dteees/icpeee2018/23351