Bainite Formation in Low Carbon Steel by Thermomechanical Control Process
نویسندگان
چکیده
منابع مشابه
AN INVESTIGATION TO BAINITE FORMATION MORPHOLOGIES IN NI-CR BEARING LOW CARBON STEELS THROUGH THERMOMECHANICAL PROCESSING
The presence of bainite in the microstructure of steels to obtain a proper combination of strength and toughness has always been desired. The previous works however have shown that the presence of preferred bainite morphologies in the microstructure of any steel would not be readily accessible. In addition, the appearance of different bainite morphologies in the microstructure of any steel is d...
متن کاملComments on “Bainite formation kinetics in high carbon alloyed steel”
We examine here the physical aspects and input parameters of a recently published model on the overall transformation kinetics of the bainite reaction in steels.
متن کاملThermomechanical Damage Modeling of F114 Carbon Steel
Abstract—The numerical simulation based on the Finite Element Method (FEM) is widely used in academic institutes and in the industry. It is a useful tool to predict many phenomena present in the classical manufacturing forming processes such as fracture. But, the results of such numerical model depend strongly on the parameters of the constitutive behavior model. The influences of thermal and m...
متن کاملDesigning low carbon, low temperature bainite
The possibility of producing bainite at low temperatures by suppressing transformation using substitutional solutes has been investigated, as an alternative to using large carbon concentrations to achieve the same purpose. It is found that although transformation temperatures can indeed be suppressed in this way, the difference between the bainite and martensite start temperatures diminishes. T...
متن کاملEffects of Ultrasonic Treatment during the Solidification Process on the Structure Formation of Low Carbon Steel
This paper studied effects of ultrasonic treatment during the solidification process on structure formation of low carbon steel. Results showed that with ultrasonic treatment grains were refined and the steel ingot avoided the cast widmanstatten structure. When ultrasonic treatment was employed, pearlite was broken and the average length of pearlite was decreased from 550mm to 140mm. The corres...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Engineering and Technology Research
سال: 2017
ISSN: 2475-885X
DOI: 10.12783/dtetr/apetc2017/11470