Bearing Capacity of Eccentrically Loaded Footings on Rock Masses Using Soft Computing Techniques
نویسندگان
چکیده
The proposed XGBoost model outperforms other models, such as RF, DNN, and LSTM, can be used accurately for estimating a strip footing's bearing capacity on rock mass subjected to incline eccentric loading loads.
منابع مشابه
Seismic Bearing Capacity of Strip Footings on Pile-Stabilized Slopes
This paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. The resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. This comparison indicates an acceptable agreement. The variants of the study incl...
متن کاملUltimate Bearing Capacity of Eccentrically Loaded Strip Foundation on Sand Reinforced with Geogrids
This paper reports the results of model loading tests performed on an eccentrically loaded strip foundation supported by multi-layered geogrid-reinforced sand. Only one type of geogrid and sand at one relative density of compaction were considered. Based on the present laboratory test results, an empirical relationship for the reduction factor has been developed. This relationship can be used t...
متن کاملEffect of Fuzzy Boundaries on the Bearing Capacity of Footings on Two-Layered Clay
In this study, fuzzy logic was implemented to formulate the fuzziness of layer boundaries for a two-layered clay soil. A field of two-layered clay with fuzzy boundaries between layers was generated, and then the bearing capacity of strip footing on this field was calculated by the assumption of plane-strain conditions. The Mohr-Coulomb failure criterion was used and bearing capacity calculation...
متن کاملBearing Capacity of Strip Footings near Slopes Using Lower Bound Limit Analysis
Stability of foundations near slopes is one of the important and complicated problems in geotechnical engineering, which has been investigated by various methods such as limit equilibrium, limit analysis, slip-line, finite element and discrete element. The complexity of this problem is resulted from the combination of two probable failures: foundation failure and overall slope failure. The curr...
متن کاملInvestigating electrochemical drilling (ECD) using statistical and soft computing techniques
In the present study, five modeling approaches of RA, MLP, MNN, GFF, and CANFIS were applied so as to estimate the radial overcut values in electrochemical drilling process. For these models, four input variables, namely electrolyte concentration, voltage, initial machining gap, and tool feed rate, were selected. The developed models were evaluated in terms of their prediction capability with m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineered science
سال: 2023
ISSN: ['2576-988X', '2576-9898']
DOI: https://doi.org/10.30919/es929