Behavior of Dynamic Strain Aging in Zr-1.5Nb-0.4Sn-0.2Fe-0.1Cr Alloy Strip
نویسندگان
چکیده
The behavior of dynamic strain aging (DSA) in a Zr-1.5Nb-0.4Sn-0.2Fe-0.1Cr alloy strip was investigated at temperature ranges 25–600 °C via tensile test. test performed two different rates 8.33 × 10<sup>-5</sup> and 1.67 10<sup>-2</sup> s<sup>-1</sup>. shear stress the revealed linear dependency on when specimens were tested under higher rate (1.67 s<sup>-1</sup>). However, relationship broken due to DSA samples deformed lower (8.33 discrepancy most significant 400 °C. trend similar irrespective orientation samples, i.e., rolling direction (RD) or transverse (TD). effect larger TD than RD samples. phenomena interpreted variation work hardening exponents sensitivity. value exponent decreased from 0.14 0.08 along 0.1 0.07 TD, respectively. smallest observed 400–500 specimen orientation, which is consistent with behavior. It suggested that caused by an interaction moving dislocations solute atoms typically oxygen.
منابع مشابه
Investigation into Aging Effect on Wear Behavior of Titanium Alloy
Ti-6Al-4V titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. In the current research, the effect of aging treatment on microstructure and wear behavior of Ti-6Al-4V titanium alloy was investigated. Pin on disk wear test was applied to assess the wear behavior. Specimens were first solut...
متن کاملStatic Strain Aging Behavior of Low Carbon Steel Drawn Wire
The static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. Thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. To do so, the wires are austenitized at different temperatures and cooled in different rates. Then the wires are drawn and aged at a specific temperature and time. Before and after aging of each...
متن کاملDynamic recrystallization behavior and processing map of the Cu–Cr–Zr–Nd alloy
Hot deformation behavior of the Cu-Cr-Zr-Nd alloy was studied by hot compressive tests in the temperature range of 650-950 °C and the strain rate range of 0.001-10 s(-1) using Gleeble-1500D thermo-mechanical simulator. The results showed that the flow stress is strongly dependent on the deformation temperature and the strain rate. With the increase of temperature or the decrease of strain rate,...
متن کاملinvestigation into aging effect on wear behavior of titanium alloy
ti-6al-4v titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. in the current research, the effect of aging treatment on microstructure and wear behavior of ti-6al-4v titanium alloy was investigated. pin on disk wear test was applied to assess the wear behavior. specimens were first solut...
متن کاملAging behavior in Cu–Al–Be shape memory alloy
This article reports positron annihilation spectroscopy and calorimetric measurements of the aging behavior in a Cu–Al–Be shape memory alloy. An excess of single vacancies is retained in the alloy as a result of a quench. All vacancies in excess disappear after long aging time, and a migration energy EM51.060.1 eV for this process has been found to be larger than in other Cu-based shape memory ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Metals and Materials
سال: 2021
ISSN: ['1738-8228', '2288-8241']
DOI: https://doi.org/10.3365/kjmm.2021.59.1.8