Behavior of Fission Products in Sulfide Reprocessing Process
نویسندگان
چکیده
منابع مشابه
Reprocessing of Medical Products in Electrophysiology
Electrophysiological procedures use high-cost multipolar electrode catheters which can be reprocessed. The reuse thereof has been performed by electrophysiology services in Europe, United States, Latin America and also in our midst. In fact, prior studies have proved that there is an actual cost decrease1,2 and have also attested to the safety and efficacy of such practice,3-12 observing rates ...
متن کاملTransmutation of Fission Products
Studies of transmutation of long-lived fission products by accelerator and by fission reactor at PNC are described. Four transmutation methods by accelerators are compared in terms of transmutation energy and transmutation rate. A super-powered electron linear accelerator which could transmute a large quantity of fission products has been studied and development of PNC test linac in this line i...
متن کاملChapter 3 Solution of Fission Products in
UO2 is the standard nuclear fuel used in modern, conventional power reactors (e.g. PWR, BWR and AGR). The oxide phase of fissile uranium provides the necessary thermodynamic stability required in operating conditions. It then follows that an extensive knowledge of the properties of this material is necessary. Unfortunately, experimental research is costly, especially if fission products are con...
متن کاملProcess parameters for optimal automatic instrument reprocessing
When reprocessing surgical instruments, process design is significant, in particular the choice of relevant process parameters for the effective removal of blood, the most common soil present. Cleaning performance is highly dependent, among other factors, on the alkalinity of the cleaning solution at appropriate temperatures to ensure that relevant specifications are fully complied with on site...
متن کاملDecontamination Study of Some Noticeable Fission Products in the Actinides Recovery by Truex Process
Decontamination performance of some noticeable fission products from TRU elements by the TRUEX process was calculated with a multistage extraction simulation code. The batch extraction data of molybdenum, palladium, antimony, and cerium, which have been obtained in our related TRUEX studies, were provided for the calculation. For uranium, plutonium, and americium, literature data were used. A m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear and Radiochemical Sciences
سال: 2012
ISSN: 1345-4749,1883-5813
DOI: 10.14494/jnrs.12.1