Behavior of polymer additives in elastohydrodynamic contact.
نویسندگان
چکیده
منابع مشابه
Polymer Additives: Supercritical Fluid Chromatography
glichkeiten. Angewandte Chemie 105: 659; Angewandte Chemie, International Edition English 32: 629. Francuskiewicz F (1994) Polymer Fractionation (Springer Lab Manual). Heidelberg: Springer Verlag. GloK ckner G (1987) Polymer Characterization by Liquid Chromatography. Amsterdam: Elsevier. GloK ckner G (1991) Gradient HPLC of copolymers and chromatographic cross fractionation. Berlin: Springer Ve...
متن کاملAdvances in Polymer Processing Additives (PPA)
In previous work, flow visualization was used to understand how polymer processing additives (PPA) eliminate sharkskin in linear low-density polyethylene (LLDPE). The PPA migrates to and coats the die wall, induces slippage, and eliminates sharkskin. In this work, the interface between the PPA and LLDPE was further characterized using reflection light microscopy, scanning electron microscopy, e...
متن کاملA Thermal Elastohydrodynamic Lubricated Thrust Bearing Contact Model
A fully-coupled thermoelastic model for a fixed pad thrust bearing has been developed. Pressure, film thickness and three-dimensional temperature profiles were obtained by simultaneously solving the Reynolds, film thickness, energy and force balance equations using a combined finite difference and finite element method. The elastic deformation due to the pressure and the thermal distortion due ...
متن کاملInvestigating Two-dimensional Behavior of Antioxidant Additives and Migration from Food Contact Polymers
Title of Document: INVESTIGATING TWO-DIMENSIONAL BEHAVIOR OF ANTIOXIDANT ADDITIVES AND MIGRATION FROM FOOD CONTACT POLYMERS Wendy Marie Heiserman, Doctor of Philosophy, 2008 Directed By: Professor Robert A. Walker Department of Chemistry and Biochemistry Research described in this thesis examines the surface and bulk behavior of analytes in food contact polymers. Irganox 1076 (IN1076) and Irgan...
متن کاملGeneration of Acoustic Emission from the running-in and subsequent micropitting of a mixed-elastohydrodynamic contact
This paper presents the use of Acoustic Emission to study the running-in and subsequent micropitting of a pair of hardened steel surfaces under mixed lubrication conditions. These surfaces were loaded together under rolling/sliding conditions typical of heavily loaded gearing. Relocation profilometry was used to measure the rapid running-in process and the development of micropits. Acoustic emi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Petroleum Institute
سال: 1979
ISSN: 0582-4664
DOI: 10.1627/jpi1958.22.52