Behavior of Refractory-lined Distributed-injection Type Cyclone Furnace

Dynamic Behavior of Geosynthetic Lined Waste Impoudments

Over the last fifteen years increased research interest has been observed on the dynamic response and stability issues of landfills. Nevertheless, there are still important aspects that have not been yet fully resolved. Geosynthetic liners, constructed to isolate waste material from the environment, are undoubtedly one of the most important issues related to seismic design of landfills, since a...

Blast Furnace Granular Coal Injection Project

Experimental Investigation of Drying Behavior of Rosehip in a Cyclone-Type Dryer

This paper describes an experimental investigation of the drying behavior and conditions of rosehip in a convective cyclone-type dryer. Drying experiments were conducted at air inlet temperatures of 50, 60 and 70 o C and air velocities of 0.5, 1 and 1.5 ms. The parametric values obtained from the experiments were fitted to the Newton mathematical models. Consequently, the drying model developed...

Blast Furnace Granular Coal Injection System Demonstration Project

The Clean Coal Technology (CCT) Demonstration Program is a government and industry co-funded effort to demonstrate a new generation of innovative coal utilization processes in a series of " showcase " facilities built across the country. These projects are carried out on a sufficiently large scale to prove commercial worthiness and generate data for design, construction, operation, and technica...

Co-Firing Ramie Residue with Supplementary Coal in a Cyclone Furnace

Co-firing ramie residue with coal was carried out in a thermogravimetric analyzer and a cyclone furnace to evaluate the effects of coal fraction (0 to 30 wt. %) on combustion performance. Thermogravimetric analysis (TGA) results showed that devolatilisation was the predominant process when the coal percentage in the blend was below 30 wt. %. For pure biomass firing in the cyclone furnace, an op...