Belite Portland Cement
نویسندگان
چکیده
منابع مشابه
Utilization of Eaf Metallurgical Slag in “green” Belite Cement
În acest studiu, zgură de cuptor cu arc electric (EAFS) colectată de la Sovel S.A., Grecia şi calcar şi argilă, de la compania de ciment Titan S.A., Grecia, au fost utilizate pentru producerea şi caracterizarea cimenturilor tip belitice. Trei tipuri de clincher au fost preparate: belitic fara adaos de zgură folosit ca referinţă (BC), unul cu 5wt% EAFS (BC5) şi un altul cu 10wt% EAFS (BC10). Ana...
متن کاملEffect of Calcium Carbonate Fineness on Calcium Sulfoaluminate-Belite Cement
This study investigated the hydration characteristics and strength development of calcium sulfoaluminate-belite (CSAB) cements incorporating calcium carbonate (CC) powders with various particle size distributions and different gypsum amounts. In general, the CSAB hydration was accelerated by the CC powder, but the acceleration and resulting strength improvement were more effective with finer CC...
متن کاملRecycled Materials in Portland Cement Concrete
.............................................................................................................................1 Wastes and By-Products for Use in Portland Cement Concrete.....................................2 RESEARCH OBJECTIVES ....................................................................................................3 LITERATURE SURVEY.....................................
متن کاملMTA versus Portland cement: review of literature
Introduction: Both Mineral Trioxide Aggregate (MTA) and Portland cement (PC) have been highlighted because of their favorable biological properties, with extensive applications in Endodontics, including the possibility of using into root canal filling. Objective: This article reviews literature related to MTA and PC comparing their physical, chemical and biological properties, as well as their ...
متن کاملDrying Shrinkage Mechanisms in Portland Cement Paste
The shrinkage mechanisms of portland cement paste were investigated from shrinkage, weight loss, and pore structure measurements using nitrogen sorption and mercury intrusion porosimetry (MIP). Thin samples (2.3 mm) of well-hydrated (165 d) pastes of 0.4 and 0.6 water-to-cement (W/C) ratios were dried directly from saturated surface dry state to 75%, SO%, 11%, and 0% relative humidity (rh). Fro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 1993
ISSN: 0387-1061
DOI: 10.3151/coj1975.31.9_18