Bending moment resistances of L-shaped furniture frame joints under tension and compression loadings.
نویسندگان
چکیده
منابع مشابه
Bending Capacity of Middle Joints of Upholstered Furniture Frames
This study evaluates the edgewise bending moment capacity of the four most frequently used middle joints in the upholstered furniture frames. The research included the following joints: Mortise and Tenon, double Dowel, Corner Blocks and double Gusset Plates, designed in the form of middle joints and made of beech and poplar solid wood. The test results indicated that regarding the edgewise bend...
متن کاملCombined Plastic Bending and Compression or Tension
So far we have assumed that a plastic hinge forms if the bending moment in a critical cross section reaches the plastic limit value, M0. We have tacitly neglected the effect of the other internal forces on the formation of the yield hinge. This effect, however, can be appreciable, for example in multi-storey frames or frames with a large horizontal thrust where the axial forces are large. So, w...
متن کاملOPTIMAL DESIGN OF COLUMNS FOR AN INTERMEDIATE MOMENT FRAME UNDER UNIAXIAL MOMENT AND AXIAL LOADS
The present study addresses optimal design of reinforced concrete (RC) columns based on equivalent equations considering deformability regulations of ACI318-14 under axial force and uniaxial bending moment. This study contrary to common approaches working with trial and error approach in design, at first presents an exact solution for intensity of longitudinal reinforcement in column section by...
متن کاملinvestigation of the bending moment and stress carrying capacity in l-shaped biscuit joints fabricated with solid wood and wood based composite
this study was aimed to investigate the bending moment and stress (inner and outer corners) in lshaped biscuit joint made of solid wood, particleboard and medium density fiberboard (mdf). for this purpose, l-shaped joints made of beech and fir, particleboard and mdf by biscuit size numbers of 0 (47×15×3.8 mm), 10 (53×19×3.8mm) and 20 (60×23×3.8mm). bending moment and stress carrying capacity of...
متن کاملShakedown and ratchetting under tension–torsion loadings: analysis and experiments
Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wood Research
سال: 2020
ISSN: 1336-4561
DOI: 10.37763/wr.1336-4561/65.6.975988