BÉZIER BASE EXTENDED ISOGEOMETRIC NUMERICAL METHOD FOR THERMO ELASTIC-PLASTIC ANALYSIS OF CRACK PROPAGATION IN CRACKED PLATE UNDER WELDING RESIDUAL STRESS AND THERMAL LOAD
نویسندگان
چکیده
A new procedure in the field of Bézier base extended isogeometric method (XIGA) has been introduced to analyze effect welding residual stress and thermal load on crack propagation rate fatigue life. This is based constitutive thermoelastic plastic equation. The main parts this are using B´ezier XIGA calculate redistribution due growth compute value intensity factor (SIF) field. For purpose, grid points elements (with C0-continuity) around line tip identified by level set representation. Then, discontinuous enrichment functions added analysis approximation. Thus, does not require re-meshing process. results show that there a good agreement between proposed numerical Hole-Drilling Strain-Gage method. interaction integral used extract SIF. effects SIF considered superposition Also, Walker equation modified life caused loading stress. display finite element Due advantages method, which eliminates parametric space allows precise addition basis cracked (crack or tip), obtained highly accurate shows effective for analyzing problems.
منابع مشابه
Vibration, Buckling and Deflection Analysis of Cracked Thin Magneto Electro Elastic Plate Under Thermal Environment
The Magneto-Electro-Elastic (MEE) material exhibits pyroelectric and pyromagnetic effects under thermal environment. The effects of such pyroelectric and pyromagnetic behavior on vibration, buckling and deflection analysis of partially cracked thin MEE plate is presented and discussed in this paper. The aim of the study is to develop an analytical model for the vibration and geometrically linea...
متن کاملThermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method
Flame bending process is one of the forming processes of steel plates. During this process, plate is formed with heating by gas torch flame followed by controlled cooling along specified paths. Considering simple tools used in the process, it is a popular and economical forming method. At present, this process is manually done on the basis of skilled technician’s experience. Experimental and ...
متن کاملThermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method
Flame bending process is one of the forming processes of steel plates. During this process, plate is formed with heating by gas torch flame followed by controlled cooling along specified paths. Considering simple tools used in the process, it is a popular and economical forming method. At present, this process is manually done on the basis of skilled technician’s 
experience. Experimental an...
متن کاملNumerical modelling of elastic-plastic deformation at crack tips in composite material under stress wave loading
The paper deals with the elastic-plastic wave propagations in an anisotropic material subjected to impact loading with emphasis on an ideal fibre-reinforced cubic material under two-dimensional plane strain condition. The system of partial differential equations is hyperbolic. Therefore a characteristic-based difference method is proposed to calculate the formation of the plastic zone at the cr...
متن کاملCrack propagation and fracture in silicon wafers under thermal stress
The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a cr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Modelling and Analysis
سال: 2022
ISSN: ['1648-3510', '1392-6292']
DOI: https://doi.org/10.3846/mma.2022.15503