Bio-corrosion behaviour of oxygen diffusion layer on Ti-6Al-4V during tribocorrosion
نویسندگان
چکیده
منابع مشابه
Notch Corrosion Fatigue Behavior of Ti-6Al-4V
The aim of this paper is to map the corrosion fatigue characteristics of Ti-6Al-4V alloy through the evaluation of the corrosion fatigue initiation and failure mechanisms. The study included the effect of the stress concentration factor at very high Kt values and the role of different inert or corrosive environments. This alloy is widely used in naval-structures and aero-engine communities and ...
متن کاملFatigue of Ti-6Al-4V
Metallic biomaterials have essentially three fields of use; these are the artificial hip joints, screw, plates and nails for internal fixation of fractures, and dental implants. Any of these devices must support high mechanical load and resistance of material against breakage is essential. High mechanical properties are needed for structural efficiency of surgical and dental implants. But their...
متن کاملMicrostructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملEffect of pH on the Corrosion Behaviour of Ti-6Al-4V alloy for Dental Implant Application in Fluoride Media
In the last few decades, titanium and its alloys have been developed in different areas of dentistry. The chemical properties of the oxide layer formed on the surface of titanium play an important role in the biocompatibility of the titanium implants and surrounding tissues. Generally, fluoride containing preparations have high fluoride concentration and pH range between 7.2 and 3.2. Since, flu...
متن کاملTensile fracture during transformation superplasticity of Ti–6Al–4V
During thermal cycling through the a–b phase transformation under the action of a small external biasing stress, Ti alloys exhibit an average deformation stress exponent of unity and achieve superplastic strains. We report tensile experiments on Ti–6Al–4V with an applied stress of 4.5 MPa, aimed at understanding the failure processes during transformation superplasticity. The development of cav...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Corrosion Science
سال: 2017
ISSN: 0010-938X
DOI: 10.1016/j.corsci.2017.08.031