Biofunctionalization of titanium for dental implant
نویسندگان
چکیده
منابع مشابه
Titanium dental implant surfaces
Osseointegration has been defined as “a direct structural and functional connection between ordered, living bone and the surface of a load-carrying implant”. However, titanium and its alloys cannot directly bond to living bone after being implanted into the body. The osseointegration of titanium dental implants is critically dependent on the implant surface properties. Various surface modificat...
متن کاملPorous Titanium for Dental Implant Applications
Recently, an increasing amount of research has focused on the biological and mechanical behavior of highly porous structures of metallic biomaterials, as implant materials for dental implants. Particularly, pure titanium and its alloys are typically used due to their outstanding mechanical and biological properties. However, these materials have high stiffness (Young’s modulus) in comparison to...
متن کاملDental implant materials: commercially pure titanium and titanium alloys.
Manufacturers use six different titanium-based biomaterials to fabricate dental implants. Each of these materials, including four grades of commercially pure titanium and two titanium alloys, has distinct mechanical and physical properties. Clinicians should recognize these differences for optimal treatment planning and patient care.
متن کاملNaOCl-mediated biofunctionalization enhances bone-titanium integration.
The aim of this study was to examine the effect of NaOCl pretreatment on the biomechanical fixation of implant at the early healing stage of a rat model. Polished titanium cylindrical implants and disks were prepared, and one-half of these samples were dual acidetched. Then, one-half of both surfaces were chemically-cleaned by pretreatment with 5% NaOCl solution for 24 h. Morphological analyses...
متن کاملA comprehensive review of techniques for biofunctionalization of titanium
A number of surface modification techniques using immobilization of biofunctional molecules of Titanium (Ti) for dental implants as well as surface properties of Ti and Ti alloys have been developed. The method using passive surface oxide film on titanium takes advantage of the fact that the surface film on Ti consists mainly of amorphous or low-crystalline and non-stoichiometric TiO(2). In ano...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japanese Dental Science Review
سال: 2010
ISSN: 1882-7616
DOI: 10.1016/j.jdsr.2009.11.001