Biomass-based gasifiers for internal combustion (IC) engines—A review
نویسندگان
چکیده
منابع مشابه
Biomass Gasification in Fluidized Bed Gasifiers Modeling and Simulation
Using woody biomass as a resource for production of biofuel, heat and power through gasification has been studied for years. In order to reduce the cost of operating and to design the full-scale gasification plant developing a general model to be applicable for different ranges of input data with acceptable level of accuracy, is needed. In order to develop such model for the gasifier, as the ma...
متن کاملDirect Combustion of Biomass
1. Background 2. Fundamentals of Biomass Combustion 2.1. Efficiency Constraints in Combustion 3. The Nature of Biomass Solid Fuels 3.1. Standard Tests in Fuels Analysis 3.2. Proximate and Ultimate Analysis 4. Fuel Preparation 5. Combustion Products from Biomass 5.1. Mineral Matter and Ash 5.2. Nitrogen Oxides 5.3. Sulfur Dioxide SO2 5.4. Chlorine – tube corrosion and dioxin (TCDD) formation 6. ...
متن کاملCombustion properties of biomass
Properties of biomass relevant to combustion are briefly reviewed. The compositions of biomass among fuel types are variable, especially with respect to inorganic constituents important to the critical problems of fouling and slagging. Alkali and alkaline earth metals, in combination with other fuel elements such as silica and sulfur, and facilitated by the presence of chlorine, are responsible...
متن کاملParticulate Matter Emission Factors for Biomass Combustion
Emission factor is a relative measure and can be used to estimate emissions from multiple sources of air pollution. For this reason, data from literature on particulate matter emission factors from different types of biomass were evaluated in this paper. Initially, the main sources of particles were described, as well as relevant concepts associated with particle measurements. In addition, arti...
متن کاملTransient combustion control of internal combustion engines
This thesis addresses the problem of combustion control for automotive engines. A method is proposed to complement existing controllers, which use lookup tables based on steady-state operation. During transients, the new control method adjusts fast control variables (ignition or injection time) to compensate for deviations in the cylinder initial conditions from their optimal values due to the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sadhana
سال: 2013
ISSN: 0256-2499,0973-7677
DOI: 10.1007/s12046-013-0145-1