Bottom‐up vs reactive sintering of Al 2 O 3 –YAG–YSZ composites via one or three‐phase nanoparticles (NPs). Bottom‐up processing wins this time

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reactive Sintering of TiAl - Ti 5 Si 3 Lnsitu Composites

TiAl with between 0 and 20 volume percent (v%)Ti5Si3 was produced by reactive sintering of cofd pressed compacts of elemental Ti, Al and Si powder mixtures at 7OO0C for 15 minutes in vacuum. The results show that adding Si to Ti and A1 reduces the swelling associated with reactive sintering of TiAI, as composites containing more than 5 vYoTigSi3 densified during reactive sintering. However, com...

متن کامل

Uniformity of Al 2 O 3 - 2 rO 2 Composites by Colloidal Filtration

Dispersion states of aqueous composite A1203 /ZrOz colloidal suspensions were studied by measuring particle size distribution as a function of pH. Mutual dispersion was achieved at p H values of 2.0 to 3.5. Consolidated composites formed by colloidal filtration reflected the uniformity of the colloidal state. The mean flexural strength (896 MPa) of the sintered compacts was 1.6 times that of bo...

متن کامل

Microwave-Assisted Sintering of Al–ZrO2 Nano-Composites

Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...

متن کامل

Synthesis and Sintering of Ti3SiC2–SiC Composites through Reactive Hot-Pressing of TiC and Si Precursors

MAX phases are an attractive class of layered solids that have recently attracted a great deal of attention due to their unusual and unique composition. The ternary compound Ti3SiC2 is an example of a material that combines the properties of ceramics and metals. As a ceramic, they are high stiff. Some of them are resistant to oxidation, creep, fatigue, corrosion. They are extremely refractory a...

متن کامل

Upconversion spectroscopy of Al 2 O 3 : Er 3 +

The spectroscopic properties of Al2O3:Er thin films have been investigated by lifetime measurements. The luminescence decay curves show an initial non-exponential component, followed by an exponential tail, whose decay time decreases with increasing Er concentration. This behavior can be described with good accuracy by a microscopic treatment that takes into account both energy migration and en...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the American Ceramic Society

سال: 2017

ISSN: 0002-7820,1551-2916

DOI: 10.1111/jace.14761