Boundary-Layer Model to Predict Chemically Reacting Flow within Heated, High-Speed, Microtubular Reactors

Implicit Methods for Computing Chemically Reacting Flow

Experimental Investigation of Shock-Wave/Boundary- Layer Interactions Over an Artificially Heated Model in Hypersonic Flow

Experimental tests have been carried out to analyze the effect of wall-to-total temperature ratio on the characteristics of a fully laminar shock-wave/boundary-layer interaction in a Mach 6 high enthalpy flow. Test cases were run in a new high-enthalpy arc-heated wind tunnel developed at Centrospazio in the framework of the ESA/FESTIP program. In order to heat-up the model surface a high temper...

Boundary layer transition in high-speed flows due to roughness

Direct numerical simulation (DNS) is used to study the effect of individual (hemispherical) and distributed roughness on supersonic flat plate boundary layers. In both cases, roughness generates a shear layer and counter–rotating pairs of unsteady streamwise vortices. The vortices perturb the shear layer, resulting in trains of hairpin vortices and a highly unsteady flow. Mach 3.37 flow past a ...

Vortex-Speed Selection Within the Rotating-Disk Boundary Layer

A theoretical investigation into the vortex-speed selection within the rotating-disk boundary layer is conducted. Two methods are used which are different to previous investigations in the literature and enable analysis of a particular vortex speed with respect to the rotating surface. Using these methods (together with arguments based on critical Reynolds numbers, unstable parameter ranges and...

Modeling of Non-isothermal Reacting Flow in Fluidized Bed Reactors

Abstract: We investigate a prototype concept of a back-up electricity device where we use liquid formic acid (FA) to produce a mixture of carbon dioxide (CO2) and hydrogen (H2) which is used in a PEM fuel cell, Fig. 1. In the fluidized bed reactor the liquid FA is decomposed to a gaseous mixture of CO2 and H2 in the presence of microscopic floating solid catalytic particles. We describe the sys...