منابع مشابه
Hydrophilicity of Silica Nano-Porous Thin Films: Calcination Temperature Effects
In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, surface characteristics, surface roughness and hydrophilic properties of the thin films were investigated by field emission scanning electron microscopy, attenuated total ...
متن کاملAtomic Transport in Nano-crystalline Thin Films
Ge and B diffusion was studied in nano-crystalline Si, and Pd and Si self-diffusion was studied in nano-crystalline Pd2Si during and after Pd/Si reactive diffusion. These experiments showed that grain boundary (GB) diffusion kinetic is the same in microand nano-GBs, whereas triple junction (TJ) diffusion is several orders of magnitude faster than GB diffusion. In addition, GB segregation and GB...
متن کاملInfluence of substrate compliance on buckling delamination of thin films
A thin film subject to in-plane compressive stress is susceptible to buckling-driven delamination. This paper analyzes a straight-sided delamination buckle with a focus on the effects of substrate compliance, following earlier work by B. Cotterell and Z. Chen. The critical buckling condition, the energy release rate and the mode mix of the interface delamination crack are calculated as a functi...
متن کاملHerringbone Buckling Patterns of Compressed Thin Films on Compliant Substrates
A thin metal film vapor deposited on thick elastomer substrate develops an equi-biaxial compressive stress state when the system is cooled due to the large thermal expansion mismatch between the elastomer and the metal. At a critical stress, the film undergoes buckling into a family of modes with short wavelengths characteristic of a thin plate on a compliant elastic foundation. As the system i...
متن کاملBuckling modes of elastic thin films on elastic substrates
Two buckling modes have been observed in thin films: buckle delamination and wrinkling. This letter identifies the conditions for selecting the favored buckling modes for elastic films on elastic substrates. Transition from one buckling mode to another is predicted as the stiffness ratio between the substrate and the film or is predicted for variation of the stiffness ratio between the substrat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2010
ISSN: 2100-014X
DOI: 10.1051/epjconf/20100626007