Buckling optimisation of sandwich cylindrical panels
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of the Buckling Response of Sandwich Panels
A comparative study of different modeling approaches for predicting sandwich panel buckling response is described. The study considers sandwich panels with anisotropic face sheets and a very thick core. Results from conventional analytical solutions for sandwich panel overall buckling and face-sheet-wrinkling type modes are compared with solutions obtained using different finite element modelin...
متن کاملLocal Buckling of Web-Core and Foam-Core Sandwich Panels
Sandwich construction is widely accepted as a method of construction especially in the aircraft industry. It is a type of stressed skin construction formed by bonding two thin faces to a thick core, the faces resist all of the applied edge loads and provide all or nearly all of the required rigidities, the core spaces the faces to increase cross section moment of inertia about common neutral ax...
متن کاملBuckling of cylindrical sandwich shells with metal foam cores
Buckling of cylindrical sandwich shells subject to axial compression is addressed for shells having foamed metal cores. Optimal face sheet thickness, core thickness and core density are obtained which minimize the weight of a geometrically perfect shell with a speci®ed load carrying capacity. Constraints imposed by wrinkling and yielding of the face sheets and yielding of the core are all consi...
متن کاملFree Vibration and Buckling Analysis of Sandwich Panels with Flexible Cores Using an Improved Higher Order Theory
In this paper, the behavior of free vibrations and buckling of the sandwich panel with a flexible core was investigated using a new improved high-order sandwich panel theory. In this theory, equations of motion were formulated based on shear stresses in the core. First-order shear deformation theory was applied for the procedures. In this theory, for the first time, incompatibility problem of...
متن کاملThermostructural Analysis of Honeycomb Sandwich Panels
Abstract The thermal analysis is performed on a heated Inconel 617 honeycomb-core sandwich panel. Sandwich panel is supported at its four edges with spar-like sub-structures that acted as heat sinks, which are generally not considered in the classical analysis. One side of the panel is subjected to a heat flux on the surface. Two types of surface heating were considered: (1) hexagonal honeycomb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Curved and Layered Structures
سال: 2016
ISSN: 2353-7396
DOI: 10.1515/cls-2016-0011