Bulge testing of copper and niobium tubes for hydroformed RF cavities
نویسندگان
چکیده
منابع مشابه
Surface Superconductivity in Niobium for Superconducting RF Cavities
A systematic study is presented on the superconductivity (sc) parameters of the ultrapure niobium used for the fabrication of the nine-cell 1.3 GHz cavities for the linear collider project TESLA. Cylindrical Nb samples have been subjected to the same surface treatments that are applied to the TESLA cavities: buffered chemical polishing (BCP), electrolytic polishing (EP), low-temperature bakeout...
متن کاملChange of Rf Superconductivity Parameters Induced by Heat Treatment on Niobium Cavities
We have investigated the thermal quench evolution of a Niobium cavity, chemically polished, during ultra high vacuum annealings from 100 to 800°C. Ten cavities have been tested before heat treatment (HT) and the results show a good agreement with the BCS theory for a diffuse reflection of the conduction electrons on the metal surface. All along the HT we have clearly identified at first the oxy...
متن کاملSimultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes
Hydroforming process is largely used for the production of tubular parts in various industries, and has advantages such as less weight, higher quality, more strength and fewer production cost compared to the conventional methods of production. The aim of this study is forming a tube-shaped part with a special geometry that has both bulge- and T-zones with tube hydroforming process. The forming ...
متن کاملPlasma Treatment of Bulk Niobium Surface for Superconducting RF Cavities: Optimization of the Experimental Conditions on Flat Samples
This Article is brought to you for free and open access by the Physics at ODU Digital Commons. It has been accepted for inclusion in Physics Faculty Publications by an authorized administrator of ODU Digital Commons. For more information, please contact [email protected]. Repository Citation Rašković, M.; Upadhyay, J.; Vuskovic, L.; Popovic, S.; Valente-Feliciano, A.-M.; and Phillips, L., ...
متن کاملDevelopment of Seamless Niobium Cavities for Accelerator Applications*
Superconducting niobium cavities for application in particle accelerators are usually fabricated by standard techniques such as forming of subcomponents by deep drawing and joining by electron beam welding. Even though these techniques are being used successfully in many larger-scale accelerator projects and improvements in accelerating gradients have been achieved over the last several years, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: A
سال: 2016
ISSN: 0921-5093
DOI: 10.1016/j.msea.2015.12.033