Cable and damper vibration studies

Semiactive Control System based on MR Damper for Suppressing Vibration of Stay Cable under Wind Load

This paper investigates the performance of the semiactive control system based on magnetorheological fluid (MR) dampers for suppressing excessive vibration of stay cable installed in cable-stayed bridges under wind load. The cable model is extracted from a 156.3 m long stay cable with high tension. The external wind load is generated from the widely used wind load spectrum such as the Kaimal sp...

Transverse Vibration Control for Cable Stayed Bridge Under Construction Using Active Mass Damper

Development of a Self-Powered Magnetorheological Damper System for Cable Vibration Control

A new self-powered magnetorheological (MR) damper control system was developed to mitigate cable vibration. The power source of the MR damper is directly harvested from vibration energy through a rotary permanent magnet direct current (DC) generator. The generator itself can also serve as an electromagnetic damper. The proposed smart passive system also incorporates a roller chain and sprocket,...

Vibration Control of MR Damper Landing Gear

In the field of Automation, Fuzzy Control Fuzzy control has significant merits which are utilized in intelligent controllers, especially for vibration control systems. This paper is concerned with the application aspects of the developed MR damper for landing gear system, to attenuate the sustained vibrations during the landing phase. Also a comparative study is made on the responses obtained f...

Universal Dynamics in Flow-Induced Cable Vibration

A combined analytical-experimental approach is used. Analytical aspects focus on the continued development of a low-order model that utilizes a series of diffusively coupled circle map oscillators along the cylinder span. This coupled map lattice has been extended to include control logic to develop a very efficient low order model for control studies in cylinder wake flows. On the experimental...