CAD Based Geometric and Force Modeling of Single Point Form-cutting Tools
نویسندگان
چکیده
منابع مشابه
Geometric Reasoning Tools for Assembly-oriented CAD
The design process supported by present CAD tools tends to be component oriented rather than dealing with a product as a whole. Furthermore, design evaluation tools often need complete product descriptions to give meaningful results. Presented here is a brief exposition of the architecture and capabilities of an Assembly-oriented Design environment that is currently being developed. It will all...
متن کاملCutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools
In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...
متن کاملA Robot Programming Environment Based on Free-Form CAD Modeling
This paper presents the mathematical and computational foundations of a robot programming environment embedded within a CAD system. The key ideas behind this system is that it will work offline, it will allow a high-level of task abstraction and it will be usable by designers and engineers who have a good knowledge of the desired task but only a basic grounding in robot engineering. In this pap...
متن کاملPoint-Based Modeling from a Single Image
The complexity of virtual environments has grown spectacularly over the recent years, mainly thanks to the use of the currently cheap high performance graphics cards. As the graphics cards improve the performance and the geometry complexity grows, many of the objects present in the scene only project to a few pixels on the screen. This represents a waste in computing effort for the transforming...
متن کاملThe Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools
Two types of alumina-based cutting tools with compositions of 90 vol.% Al2O3+10 vol.% ZrO2 and 80 vol.% A12O3+20 vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computer-Aided Design and Applications
سال: 2013
ISSN: 1686-4360
DOI: 10.3722/cadaps.2013.45-57