Capacitive electrical asymmetry effect in an inductively coupled plasma reactor
نویسندگان
چکیده
منابع مشابه
Effect of capacitive coupling on inductively coupled fluorocarbon plasma processing
This article describes results obtained using various plasma and surface diagnostics in a study of inductively coupled fluorocarbon plasmas in which the amount of capacitive coupling was systematically varied. It is found that the plasma density decreases while the electron temperature increases as the amount of capacitive coupling is increased at a constant source power level. The rate at whic...
متن کاملSelective etching of SiO2 over polycrystalline silicon using CHF3 in an inductively coupled plasma reactor
Selective etching of SiO2 over polycrystalline silicon has been studied using CHF3 in an inductively coupled plasma reactor ~ICP!. Inductive powers between 200 and 1400 W, as well as pressures of 6, 10, and 20 mTorr were used in this study of the etch rate and selectivity behaviors for silicon dioxide, silicon, and passively deposited fluorocarbon films. Using in situ ellipsometry, the etch rat...
متن کاملPhotoresist erosion studied in an inductively coupled plasma reactor employing CHF3
The evolution of integrated circuits into the ultralarge scale integrated regime takes today’s 0.35 mm circuit design rules to even smaller values of 0.18 mm and beyond. As a consequence, photoresist masks are becoming thinner and even more prone to erosion by etching. For this work an I-line novolak resist was used. Etch rates for various process conditions using in situ ellipsometry were obta...
متن کاملIntegrated plasma equipment model for polysilicon etch profiles in an inductively coupled plasma reactor with subwafer and superwafer topography
Above wafer topography of the substrate, such as wafer clamps, is known to impact adjacent feature profiles during plasma etching of microelectronic devices. The consequences of subwafer topography, such as electrostatic chucks and cooling channels, on feature profiles is less well characterized. To investigate these issues we have developed and integrated a plasma equipment model and a Monte C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Plasma Sources Science and Technology
سال: 2018
ISSN: 1361-6595
DOI: 10.1088/1361-6595/aad796