Capacity Contribution Mechanism of rGO for SnO2/rGO Composite as Anode of Lithium-ion Batteries
نویسندگان
چکیده
Abstract Compared with ordinary graphite anode, SnO 2 possesses higher theoretical specific capacity, rich raw materials and low price. While the severe volume expansion of during lithium-ion extraction/intercalation limits its further application. To solve this problem, in work reduced graphene oxide (rGO) was introduced as buffer matrix . Herein, /rGO composite is obtained through one-step hydrothermal method. Three-dimensional structure rGO could effectively hinder polymerization nanoparticles provide more lithium storage sites attributed to high surface area density defects. The initial discharge capacity cathode 959 mA·h·g -1 remained at 300 after 1000 cycles 1 C. It proved that added anode has a contribution battery. changes mechanism from diffusion process dominance driven capacitive contribution. Due addition rGO, material gains stable great conductivity.
منابع مشابه
Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملInvestigating the Energy Storage Mechanism of SnS2‐rGO Composite Anode for Advanced Na-Ion Batteries
Tin sulfide−reduced graphene oxide (SnS2rGO) composite material is investigated as an advanced anode material for Na-ion batteries. It can deliver a reversible capacity of 630 mAh g−1 with negligible capacity loss and exhibits superb rate performance. Here, the energy storage mechanism of this SnS2-rGO anode and the critical mechanistic role of rGO will be revealed in detail. A synergistic mech...
متن کاملElectrochemical Evaluation of PbO Nanoparticles as Anode for Lithium Ion Batteries (Technical Note)
PbO nanoparticles were synthesized using hydrothermal process. Scanning electron microscopy (SEM) was used in order to investigate of PbO powders. X-ray diffraction (XRD) pattern confirmed β-PbO formation during this process. The crystallite size of the powders was calculated using Scherrer formula about 74.6 nm. Electrochemical evaluation of the PbO nanoparticles as anode for Li-ion batteries ...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملCu3P/RGO Nanocomposite as a New Anode for Lithium-Ion Batteries
Cu3P/reduced graphene oxide (Cu3P/RGO) nanocomposite was successfully synthesized by a facile one-pot method as an advanced anode material for high-performance lithium-ion batteries. Cu3P nanostructures with a polyhedral shape with the mean diameter (80-100 nm) were homogeneously anchored on the surface of RGO. The flexible RGO sheets acted as elastic buffering layer which not only reduced the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese journal of mechanical engineering
سال: 2022
ISSN: ['1000-9345', '2192-8258']
DOI: https://doi.org/10.1186/s10033-022-00739-8