Capacity interaction in brick masonry under simultaneous in-plane and out-of-plane loads
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of the Damage Mechanics of Masonry under Dynamic In-plane Loads
The evolution of the damage mechanic properties for un-reinforced masonry panels under dynamic loads is critical in a time-domain analysis of masonry shear walls. This research project experimentally investigates the evolution of the properties of the damage variable for unreinforced masonry panels, subject to dynamic in-plane displacement controlled strain. This paper presents the theoretical ...
متن کاملIn-Plane and out of Plane Free Vibration of U-Shaped AFM Probes Based on the Nonlocal Elasticity
Atomic force microscope (AFM) has been developed at first for topography imaging; in addition, it is used for characterization of mechanical properties. Most researches have been primarily focused on rectangular single-beam probes to make vibration models simple. Recently, the U-shaped AFM probe is employed to determine sample elastic properties and has been developed to heat samples locally. I...
متن کاملEffect of static and kinematic boundary conditions on the out-of-plane response of brick masonry walls
The Unreinforced Wall (URM) elements that are most susceptible to out-of-plane failure are wall elements of the upper storeys where the accelerations are largest. In modern URM buildings with reinforced concrete slabs, the out-of-plane mechanism involves typically a storey-high wall element, which is subjected at its base and top to the accelerations of the corresponding floor slabs. The accele...
متن کاملLimit states of modern unreinforced clay brick masonry walls subjected to in-plane loading
Recent research showed that the in-plane horizontal displacement capacity of unreinforced masonry (URM) walls depends on numerous factors that are not yet captured by current empirical drift capacity models; e.g., axial stress, shear span, geometry of the walls and the material used. In order to improve the performance-based assessment of URM wall buildings, future research should aim at develo...
متن کاملAn electro-thermal silicon-polymer micro-gripper for simultaneous in- plane and out-of-plane motions
An electro-thermal micro-gripper for both in-plane clamping and out-of-plane motion is presented. The device consists of both in-plane and out-of-plane actuators. Each gripper arm performs a 7.4 μm in-plane and a 14 μm out-of-plane motion at 1.6 V and 2.5V actuation voltage, respectively. The maximum temperature and power consumption are 180 °C and 26.5 mW and 80 °C and 87.3mW for the in-plane ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2013
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2012.08.032