Carbon Fiber Reinforced Thermoplastics for Application to Automobiles
نویسندگان
چکیده
منابع مشابه
Fiber–fiber interactions in carbon mat thermoplastics
Carbon mat thermoplastics (CMT) consisting of 12.7 mm long, chopped carbon fibers in a polypropylene matrix were manufactured using the wetlay technique at fiber volume fractions (FVF) from 10% to 25%, and tests simulating the compression molding process were conducted. The packing stress of the CMT followed a power law relation with FVF. A single fiber pull-out fixture was used to measure the ...
متن کاملCarbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملDesigning of the Heating Process for Fiber- Reinforced Thermoplastics with Middle-Wave Infrared Radiators
Manufacturing components of fiber-reinforced thermoplastics requires three steps: heating the matrix, forming and consolidation of the composite and terminal cooling the matrix. For the heating process a pre-determined temperature distribution through the layers and the thickness of the pre-consolidated sheets is recommended to enable forming mechanism. Thus, a design for the heating process fo...
متن کاملPolyamide Fiber Reinforced Shotcrete for Tunnel Application
This study intends to establish the mechanical properties of polyamide fiber reinforced shotcrete (PAFRS) in terms of compressive and flexural strengths, in accordance with ASTM C1609/C1609M-12. The mechanical properties identified the influence of polyamide fiber content on the PAFRS strength. This study evaluated the toughness of PAFRS and proposed additional toughness level criteria to bette...
متن کاملCarbon Fiber-Reinforced Elastomeric Pads for Building Isolation
535] A new and unique building vibration isolation pad has been developed utilizing alternating layers of elastomer and carbon fiber mesh. The carbon mesh reinforcement provides several distinct advantages over traditional steel plate reinforcement. Lower natural frequencies and/or smaller operating heights can be obtained for a given load. In addition, the carbon mesh forms both chemical and m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 2017
ISSN: 0915-4027,1883-7417
DOI: 10.4325/seikeikakou.29.227