Carbon nanotube shear-pressed sheet interleaves for Mode I interlaminar fracture toughness enhancement
نویسندگان
چکیده
منابع مشابه
AFRL-AFOSR-VA-TR-2015-0323 Multifunctional Shear Pressed CNT Sheets for Strain Sensing and Composite Joint Toughening
This research program investigated critical fabrication aspects, mechanical and electrical properties, andpotential applications of a novel carbon nanotube material, named shear-pressed sheet. This material isfabricated from the chemical vapor deposition grown, tall aligned carbon nanotube arrays, with the use ofautomated shear-pressing device. It was shown that such sheets, having ...
متن کاملEffects of Temperature and Fiber Orientation on the Mode I Interlaminar Fracture Toughness of Carbon/epoxy Composites
Delamination is a predominant failure mechanism in composite structures. In the present study, double cantilever beam tests were performed to investigate the effects of temperature and fiber orientation on the Mode I interlaminar fracture toughness, G I , of carbon fiber-reinforced epoxy composites, T800H/#3631. The values of G I for three kinds of laminates, [0 12 //0 12 ], [22.5/-22.5/0 8 /-2...
متن کاملMode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
1.1 This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite materials using the double cantilever beam (DCB) specimen (Fig. 1). 1.2 This test method is limited to use with composites consisting of unidirectional carbon fiber and glass fiber tape laminates with brittle and tough single-phase polymer matrice...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2016
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2015.10.014