Catalytic quality improvement of waste polyolefin originated fractions

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

Photoelectrocatalytic Treatment of Waste Originated from Gold Mines

Catalytic conversion of waste low density polyethylene into fuel oil

Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...

Miscibility of Polyolefin Blends

Phase separation in polymers is important for many technical applications but is difficult to predict theoretically. Recently, extensive experimental studies on the miscibility of polyolefins revealed that these systems display a wider variety of mixing behavior than their chemical similarity suggests. In order to predict phase diagrams of polyolefin blends from pure component properties, we ha...

Chloride extraction for quality improvement of municipal solid waste incinerator ash for the concrete industry.

Coal ash from power stations has long been used successfully in the cement industry as binders in several Portland formulations. This is not the case for municipal solid waste (MSW) ash as chloride concentrations, ranging from 10 to 200 g kg(-1) dry weight in the bottom and fly ash, respectively, exceed the maximum allowable concentration in most cement mixtures. To reduce chloride content in M...