Cathodic Protection of Ship Hull by Automatically Controlled Impressed Current
نویسندگان
چکیده
منابع مشابه
APPLIED OF IMPRESSED CURRENT CATHODIC PROTECTION DESIGN FOR FUEL PIPELINE NETWORK AT NAVAL BASE
Indonesian Navy (TNI AL) is the main component for Maritime Security and Defence. Because of that, TNI AL needs Indonesian Warship (KRI) to covered Maritime area. The main requirement from KRI is fulfilled by demand. To pock of fuel demand from KRI at Naval Base, it needs a new pipeline of fuel distribution network system. The pipeline network system used for maximum lifetime must be protected ...
متن کاملCONSIDERATION OF DESIGN FOR PRODUCTION PRINCIPLES IN SHIP HULL DESIGN
In designing for ship production, the production method should be considered and it’s possible to reduce the manufacturing cost in designing procedure. A review of background of ship design that had minimized production costs, shows the principles and problems of these methods. Modern designing methods for manufacturing, considers hydrodynamic efficiency and less manufacturing cost. Quant...
متن کاملOptimization of Cathodic Protection on Offshore Structures
Marine structures are one of the most important and susceptible facilities in Iran due to corrosion. The two methods of Cathodic Protection, namely, the cathodic protection with sacrificial anodes and cathodic protection using impressed current, are widely used for corrosion protection. According to the former, sacrificial anodes are installed at several points in the structure. Position of the...
متن کاملOptimization of Cathodic Protection on Offshore Structures
Marine structures are one of the most important and susceptible facilities in Iran due to corrosion. The two methods of Cathodic Protection, namely, the cathodic protection with sacrificial anodes and cathodic protection using impressed current, are widely used for corrosion protection. According to the former, sacrificial anodes are installed at several points in the structure. Position of the...
متن کاملAutomatic surface modelling of a ship hull
When defining a ship hull surface, the main objective is to obtain a faired surface or surfaces that contain some specific points of the hull, that have been selected in the design process and give the ship its hydrodynamic, stability and other properties. So, the hull surface should be a compromise between fairness and precision, and this is not and easy task. In this paper, authors present a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING DIGEST
سال: 1964
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1954.13.10-11_447