Cavitation Erosion Resistance of Austenitic-Ferritic Duplex Stainless Steel
نویسندگان
چکیده
منابع مشابه
Corrosion resistance of austenitic stainless steel in sulphuric acid
The resistance and susceptibility of austenitic stainless steel, Type 304, exposed to strong tetraoxosulphate (VI) acids (2 and 5 M concentrations) contaminated with sodium chloride at ambient temperatures was investigated by gravimetric and metallographic/scanning electron microscopy surface characterization methods. Scanning electron microscope (SEM) was used to examine and characterize the t...
متن کاملExternal corrosion resistance of steel and ferritic stainless steel exhaust systems
The exhaust system has a number of requirements to fulfil. The major ones are to reduce the noise level created by the engine, to channel the waste gases out the rear of the automobile, to minimize the reduction in engine performance, and to have an acceptable service life and cost1. The exhaust system is divided into two main parts, the hot end and the cold end. The components comprising the h...
متن کاملThe Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel
In the present research, the effect of the homogenization process and annealing temperature were investigated for the 1.4470 ferritic-austenitic stainless steel in the as-cast condition. In this regard, microstructural evolutions, hardness, and impact energy of the steel was evaluated with different heat treatment conditions. The results show that the minimum volume fraction of austenite phase ...
متن کاملPrecipitation sequence in niobium-alloyed ferritic stainless steel
Niobium is an important alloying element in the design of heat-resistant ferritic stainless steels for automotive exhaust systems. When in solid solution, it improves both the high temperature strength and the resistance to thermal fatigue. However, it also forms several kinds of precipitates during service. These reactions have been modelled, taking into account the multicomponent nature of th...
متن کاملMicrostructural Transformations of a Duplex Steel Weld and their Influence on the Particle and Cavitation Erosion Resistance
Original scientific paper The microstructural transformations which took place during the welding of duplex steel as well as their influence on the resistance to particle erosion wear and cavitation erosion wear were investigated. A sample was cut from a 1.4462 rolled steel plate and heat treated in order to obtain a microstructure which would resemble, as closely as possible, the actual welded...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2008
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.74.605