Cavitation erosion testing of different cavitation-resistent materials and coatings using the cavitating jet method
نویسندگان
چکیده
منابع مشابه
Scaling of Cavitation Erosion Progression with Cavitation Intensity and Cavitation Source
A simple mathematical expression is presented to describe cavitation mean depth of erosion versus time for cavitating jets and ultrasonic cavitation. Following normalization with a characteristic time, t*, which occurs at 75% of the time of maximum rate of erosion, and a corresponding material characteristic mean erosion depth, h*, the normalized erosion depth is related to the normalized time ...
متن کاملA New Parameter to Predict Cavitation Erosion
In order to avoid or predict cavitation erosion, it is necessary to know resistance of materials against to cavitation impacts. The cavitation impacts, which are larger than certain threshold level, only affect cavitation erosion of materials. In the present paper, existence of the threshold level was revealed experimentally. The threshold level of material is a new parameter to predict the cav...
متن کاملEffect of Injection Pressure and Size of Nozzle Throat of a Cavitating Jet on Cavitation Peening
Abstract Cavitation peening is a peening method using impacts at cavitation bubble collapses generated by a cavitating jet. In order to introduce compressive residual stress avoiding damage on the peened surface, residual stress of stainless steel was investigated at various cavitating conditions. It was revealed that the large cavitating jet at low injection pressure such as 30 MPa can introdu...
متن کاملThe Volume Factor in Cavitation Erosion
Use of jet cavitation, however, occurs through an exit nozzle whose diameter can be changed, thereby changing volume with changing velocity. The results of such a change is shown to tie cavitation damage more powerfully to volume flow than to velocity. A specific example is in cavitation erosion of a high strength igneous rock which remained virtually undamaged at 70 MPa driving pressure but wa...
متن کاملTowards numerical prediction of cavitation erosion.
This paper is intended to provide a potential basis for a numerical prediction of cavitation erosion damage. The proposed method can be divided into two steps. The first step consists in determining the loading conditions due to cavitation bubble collapses. It is shown that individual pits observed on highly polished metallic samples exposed to cavitation for a relatively small time can be cons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2019
ISSN: 1755-1315
DOI: 10.1088/1755-1315/240/6/062057