Cement hydration with ultrasound treated clinoptilolite

NMR Studies of Cement Hydration

The raw materials constituting the Portland cement are mainly lime, silica, alumina and iron oxide. During the manufacturing process, a glassy quasicrystalline clinker is formed which is ground, normally with addition of 1-3 wt% of CaSCU in the cement powder. This powder has four major constituents: 3 CaO"SiO2 (in cement chemists' notation C3S), 2 CaOSiO2 (C2S), 3 CaOAl2O3 (C3A) and 4 GaOAl2O3F...

Hydration of cement mixtures containing contaminants

Hydration Kinetics Model of Supersulfated Cement

Supersulfated cement, with higher waste utilization and less cement clinker is the inevitable trend of the development of green material in the rapid developed industrial era. For the wide use of supersulfated cement in our country, the hydration heat is analyzed in this paper. The hydration kinetic parameters are obtained from the hydration heat and hydration heat rate curves measured by the i...

A mild alkali treated jute fibre controlling the hydration behaviour of greener cement paste

To reduce the antagonistic effect of jute fibre on the setting and hydration of jute reinforced cement, modified jute fibre reinforcement would be a unique approach. The present investigation deals with the effectiveness of mild alkali treated (0.5%) jute fibre on the setting and hydration behaviour of cement. Setting time measurement, hydration test and analytical characterizations of the hard...

The Effect of Curing Temperature on White Cement Hydration

Cement manufacture has undergone extensive change in its attempts to rise to the successive challenges posed by society. The hydration of Portland cement is a complex phenomenon that depends on both reagent characteristics and reaction conditions. It is a well-known fact that the curing temperature plays an important role on the hydration kinetics. The present study is the first to be undertake...