Cemented carbide microstructures: a review
نویسندگان
چکیده
منابع مشابه
Development of Creep-Resistant Tungsten Carbide Copper Cemented Carbide
Fine-grained tungsten carbide copper (WC-Cu) cemented carbide was sintered via spark plasma sintering at 1773K using a fine WC powder with a mean particle size of 0.11 mm. The mechanical properties were compared with tungsten carbide cobalt (WC-Co) cemented carbide and a binderless WC-sintered material. The Vickers hardness and fracture toughness obtained by the indentation fracture method for ...
متن کاملDevelopment of Cemented Carbide Tool of Reduced Rare Metal Usage
Cemented carbides, including coated cemented carbides, account for 75% of the cutting tools market because of their features such as high hardness, toughness, and the responsiveness to iron, through the use of tungsten carbide for their main hard phases and cobalt for their bonding metals. The consumption of tungsten continues to increase as the amount of carbide tool production increases with ...
متن کاملOxidation Behaviour of Silicon Carbide - a Review
Silicon Carbide as an inorganic material possesses properties like high thermochemical stability, high hardness and fracture toughness, low thermal expansion coefficient etc. It is therefore, widely used in the making of refractory, semiconductor devices, combustion engines, etc. Being a nonoxide, it has a tendency to get oxidized at elevated temperature under oxidizing atmosphere. Oxidation of...
متن کاملCarbide Precipitation in the Microstructures of Austempered Ductile Irons Containing 0.48% and 4.88% Al
The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. The presence of well distributed graphite in the matrix, and a relatively high volume fraction of retained austenite are responsible for the good mechanical properties of the Aluminium alloyed austempered ductile irons including excellent wear resistance, higher resistance to thermal shock,...
متن کاملInfluence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide
Tribological characteristics of fine-grained WC–8 wt%Ni with different surface finishing conditions corresponding to sequential wire electrical discharge machining (wire-EDM) or grinding were investigated by performing dry reciprocating sliding experiments on TE77 pin-on-plate equipment with WC–6 wt%Co as mating material. Surface finishes and wear surfaces were characterized using surface topog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Refractory Metals and Hard Materials
سال: 2019
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2018.12.004