Ceramic processing for magnetic applications
نویسندگان
چکیده
منابع مشابه
Parleda: a Library for Parallel Processing in Computational Geometry Applications
ParLeda is a software library that provides the basic primitives needed for parallel implementation of computational geometry applications. It can also be used in implementing a parallel application that uses geometric data structures. The parallel model that we use is based on a new heterogeneous parallel model named HBSP, which is based on BSP and is introduced here. ParLeda uses two main lib...
متن کاملCeramic Capillary Suspensions: Novel Processing Route for Macroporous Ceramic Materials
We introduce a novel method to produce macroporous ceramics by capillary suspensions. Adding a small amount (~1 vol%) of an immiscible secondary phase to a low concentration (~20 vol%) suspension can increase the yield stress by several orders of magnitude. This drastic change in flow behavior is induced by the creation of a sample-spanning particle network in the suspension controlled by capil...
متن کاملFracture of ceramic/ceramic/polymer trilayers for biomechanical applications.
Fracture damage in trilayers consisting of outer and inner brittle layers bonded to a compliant (polycarbonate) substrate and subjected to concentrated surface loading is analyzed. The principal mode of fracture is radial cracking at the undersurface of the inner (core) layer, even in the strongest of core ceramics--other damage modes, including radial cracking in the outer (veneer) layer, are ...
متن کاملEarth’s Magnetic Field for Spacecraft Attitude Control Applications (TECHNICAL NOTE)
In this paper the earth’s magnetic field is simulated precisely while the intensity and direction of the field are verified with one of the standard references for selected points on the earth and the results are compared with some low-order models. In another simulation, the complete model is compared with a common approximate model. The magnetic field in orbital frame is described and to empl...
متن کاملProcessing Capability of Apatite-Mullite Glass-Ceramic Materials for the Production of Dental Restorations
Introduction: There is currently significant interest in all-ceramic dental restorations. A potential non-metallic material for such restorations is an apatite-mullite glass-ceramic that could be processed to shape using different processing techniques. The aim of this study was to assess and evaluate the ability of an apatite-mullite glass-ceramic material to be processed using three routes: l...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: B
سال: 1989
ISSN: 0921-5107
DOI: 10.1016/0921-5107(89)90153-0