Ceramic Thin Film Processing in Aqueous Solutions
نویسندگان
چکیده
منابع مشابه
Effects of ionic surfactant adsorption on single-walled carbon nanotube thin film devices in aqueous solutions.
Field-effect transistors were fabricated using high-density single-walled carbon nanotube (SWNT) thin films directly grown on suitable substrates. Such approach eliminated the variations of device behaviors in individual SWNT devices by utilizing a large number of SWNTs in each device. We have found that the behaviors of such devices are closely related to the surface charge densities around SW...
متن کاملMetallic and Ceramic Thin Film Thermocouples for Gas Turbine Engines
Temperatures of hot section components in today's gas turbine engines reach as high as 1,500 °C, making in situ monitoring of the severe temperature gradients within the engine rather difficult. Therefore, there is a need to develop instrumentation (i.e., thermocouples and strain gauges) for these turbine engines that can survive these harsh environments. Refractory metal and ceramic thin film ...
متن کاملOptical diagnostics for thin film processing.
Optical diagnostics are used to probe the plasma or neutral gas above the substrate, particles in the gas or on the surface, the film surface and reactor walls, the film itself, and the substrate during thin film processing. The development and application of optical probes are highlighted, in particular for analyzing plasma/gas phase intermediates and products and film composition, and perform...
متن کاملAnionic/Non-ionic Surfactants in Aqueous Phase of Thin Film Composite Poly(Paraphenylene Terephthalamide) Nanofiltration Membranes
In this work, the Interfacial interfacial polymerization (IP) technique was employed using terephthaloyl chloride (TPC) and p-phenylenediamine (PPD), as reactant monomers, to prepare poly(paraphenylene terephthalamide) thin film composite (TFC) nanofiltration on polyethersulphone (PES) support layer. The effects of six different anionic and non-ionic surfactants, in the aqueous phase on the mor...
متن کاملBaFe12O19 thin film grown by an aqueous sol-gel process
In this communication we present a new sol–gel route to obtain high quality BaFe12O19 thin films. X-ray analysis confirmed the crystal structure with a crystal size of 32 nm. Atomic force microscopy images determined the film thickness to be around 250 nm and a roughness factor of less than 40 nm where the grain size averaged around 150 nm. SQUID magnetometer data shows a magnetic behavior simi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2012
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.59.313