CFD ANALAYSIS OF FLOW THROUGH A CONICAL EXHAUST DIFFUSER

Prediction of the turbulent flow in a diffuser with commercial CFD codes

Numerical Studies of Flow through Annular Curved Diffuser

In the present investigation the distribution of mean velocity, static pressure and total pressure are experimentally studied on an annular curved diffuser of 37.5° angle of turn with an area ratio of 1.284 and centerline length was chosen as three times of inlet diameter. The experimental results then were numerically validated with the help of Fluent and then a series of parametric investigat...

CFD-Calculation of Fluid Flow in a

An accurate description of the fluid flow and heat transfer within a Pressurized Water Reactor (PWR), for the safety analysis and reactor performance is always desirable. In this paper a mathematical model of the fundamental physical phenomena which are associated to a typical PWR is presented. The mathematical model governs the fluid dynamics in the reactor. Using commercial software CFX, a co...

Flow of Formulation Granules through a Conical Hopper

Gravity flow characteristics of various pharmaceutical granules through static conical hoppers of different cone angles were studied. Mass flow rate depends on properties of granules and cone angles when environmental conditions such as temperature and relative humidity are kept within a fixed range. The granules were made with active pharmaceutical ingredients as per Indian pharmacopoeia with ...

CFD Simulation of Bubbly Flow Through a Bubble Column

In this investigation, CFD simulation is presented to study the hydrodynamic of bubbly flow and mass transfer in bubble column using EulerianEulerian Multifluid approach with a standard kε turbulence model. unsteady state method for modeling the multiphase flow and mass transfer from air to de-aerated water and the column hydrodynamics. Understanding the complexity of the fluid dynamics and mas...