CFD Analysis of Heat Transfer Phenomena in Arc Plasma Reactor
نویسندگان
چکیده
In order to control flows and temperature distribution within plasma reactors experimentally requires significant research development costs. the computational fluid dynamics (CFD) can be used as a powerful tool investigate flow pattern heat transfer inside allowing us construct best designs with minimal cost. this work profile gas in thermal reactor for carbon nanotubes synthesis is studied by COMSOL Multiphysics. Two background gases Helium (He) Nitrogen (N2) was compared. We conclude that unlike Nitrogen, ensures good recirculation arc chamber therefore replenishment of atmosphere reactants during process.
منابع مشابه
Intercomponent Heat Transfer of Dispersed Materials in a Plasma Reactor
The results are reported of the experlmental investigation ertalning to the interphase heat exchange of the particles of ilspersed materlal In the plasma reactor wlth multl-jet mixing chambers. The effect Is established of the mass flow rate concentratlon of the dlspersed ma'lerial on the heat flux to the reactor walls. The experimental data on the inte hase heat exchange of varlous particles a...
متن کاملInvestigation of Heat Transfer Parameters of a Bundle of Heaters in a Simple Bubble Column Reactor Using CFD Method
Bubble columns are gas- liquid contactors that are widely used in chemical and bio- chemical industries. High mixing that result in high heat and mass transfer rates are amongst their advantages. Heat transfer in a bubble column having a bundle of heaters investigated and the variation of heat transfer coefficient with variation in heaters pitch to diameter ratios in a bundle of heaters reporte...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملCFD simulation of heat transfer in ferrofluids
In this work time dependent heat transfer flow through a kerosene based ferrofluid is considered. The flow is in a cylindrical geometry with the height and diameter of 10 mm. Computational fluid dynamics was used to simulate the system. In CFD simulations mixture model was applied to describe the behavior of the magnetic particles. A uniform magnetic field with different strengths and direction...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Instrumentation mesure me?trologie
سال: 2022
ISSN: ['2269-8485', '1631-4670']
DOI: https://doi.org/10.18280/i2m.210401