CFD ANALYSIS ON DIFFERENT PISTON BOWL GEOMETRIES BY USING SPLIT INJECTION TECHNIQUES
نویسندگان
چکیده
منابع مشابه
Modification of piston bowl geometry and injection strategy, and investigation of EGR composition for a DME-burning direct injection engine
The amount of pollutant gases in the atmosphere has reached a critical state due to an increase in industrial development and the rapid growth of automobile industries that use fossil fuels. The combustion of fossil fuels produces harmful gases such as carbon dioxide, nitrogen monoxide (NO), soot, particulate matter (PM), etc. The use of Dimethyl Ether (DME) biofuel in diesel engines or other c...
متن کاملBeam-ion confinement for different injection geometries
The DIII-D tokamak is equipped with neutral beam sources that inject in four different directions; in addition, the plasma can be moved up or down to compare off-axis with on-axis injection. Fast-ion data for eight different conditions have been obtained: co/counter, near-tangential/near-perpendicular and on-axis/off-axis. Neutron measurements during short beam pulses assess prompt and delayed ...
متن کاملUrea Injection Design Analysis for NOx Control using CFD
There are many industrial pollutants produced from coal fired power generation plants. Recent legislation is pushing to reduce these emissions. Greenhouse gasses as well as nitrous oxides (NOX) and sulfur dioxide (SO2) are the targeted pollutants. Governmental legislation outlined by Environmental Protection Agency (EPA) through its Maximum Achievable Control Technology (MACT) guideline is a ma...
متن کاملInjection geometries
In this paper a new concept, injection geometries, is considered. This provides a common generalization of matroids and permutation geometries. Different systems of axioms and various examples are given. Theorem 5.1 provides an extremal set theoretic characterization of injection designs. 0 1984 Academic Press, Inc.
متن کاملeffects of piston bowl geometry on combustion and emissions characteristics of a natural gas/diesel rcci engine
reactivity controlled compression ignition (rcci) is a novel combustion concept which uses port fuel injection (pfi) of a low reactivity fuel and direct injection (di) of a high reactivity fuel with optimum multiple injection to provide a stratified mixture inside the combustion chamber. piston bowl design has a considerable effect on engine’s pollutant emissions specially unburned hydrocarbons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Mechanica Malaysia
سال: 2019
ISSN: 2616-4302
DOI: 10.26480/amm.01.2019.23.28