CFD Simulation of Thermal-Hydraulic Benchmark V1000CT-2 Using ANSYS CFX
نویسندگان
چکیده
منابع مشابه
Simulation of Aerodynamic Divergence and Flutter on Wind Turbines using ANSYS-CFX
The recent development of large wind turbines poses new challenges with regard to understanding the mechanisms surrounding unsteady flow-structure interaction. The larger and more flexible blades imply risks from an aeroelastic point of view and urge the need to properly understand and model these phenomena. Due to limited experimental data available in this field, Computational Fluid dynamics ...
متن کاملSimulation of Free Surface Flows with Surface Tension with ANSYS CFX
Three different test cases involving free surface flows with surface tension were investigated with ANSYS CFX. Transient analyses were performed in all cases. The three cases were: (1) oscillations of a twodimensional cylindrical rod; (2) rise of liquid in a capillary; and (3) rise of an air bubble train through stagnant water. The mesh resolution, timestep, and solver settings required to obta...
متن کاملCoolant Mixing Studies of Natural Circulation Flows at the Rocom Test Facility Using Ansys Cfx
Partial depletion of the primary circuit during a postulated small break loss of coolant accident can lead to the interruption of one-phase flow natural circulation. In this case, the decay heat is removed from the core in the reflux-condenser mode. In case of the partial non-availability of the safety injection system, weakly borated condensate can accumulate in particular in the pump loop sea...
متن کاملTRACE/PARCS Calculations of Exercises 1 and 2 of the V1000CT-2 Benchmark
Exercises 1 and 2 of the VVER-1000 Coolant Transient Benchmark Phase 2 (V1000CT-2) are investigated using coupled three-dimensional (3-D) neutron kinetics/thermal-hydraulics code TRACE/PARCS. Two coarse mesh 3-D thermal-hydraulic models (with six angular sectors and with eighteen angular sectors) were developed for the system code TRACE for Exercise 1 and their applicability is evaluated using ...
متن کاملStudy of Forces and Dynamic Coefficients in Whirling and Eccentric Labyrinth Seals Using ANSYS-CFX
Labyrinth seal force estimates are important to the prediction of the stability of turbomachinery. The force prediction methods fall into several categories: experiments, bulk flow analysis, and finite volume analysis. Finite volume analysis can be split into two subcategories: selfdeveloped and commercial. In this research, a commercial computational fluid dynamics (CFD) program called ANSYSCF...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Technology of Nuclear Installations
سال: 2009
ISSN: 1687-6075,1687-6083
DOI: 10.1155/2009/835162