Changes of structure and hardness in semi-solid die casting for rapidly solidified Al-Si alloy powder.
نویسندگان
چکیده
منابع مشابه
FIB cross-sectioning of a single rapidly solidified hypereutectic Al-Si powder particle for HRTEM.
A creative technique of in-situ focused ion beam (FIB) extraction was introduced to prepare a gas atomized rapidly solidified hypereutectic Al-Si single particle's cross-section for High Resolution Transmission Electron Microscopy (HRTEM) analysis. This preparation technique may be employed to characterize very inimitable samples that are abnormally wrought or intricate to prepare through tradi...
متن کامل“ Microstructural and mechanical properties of eutectic Al – Si alloy with grain refined and modified using gravity - die and sand casting ”
This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...
متن کاملOptimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
Semi-Solid Casting (SSM) is a new process that could produce globular structures with mechanical properties. The cooling slope method (CLM) is a one of this process that was employed to produce the A360 feedstock. In this method, The dendritic primary phase in the conventionally cast A356 alloy has transformed into a non-dendritic one. In this paper, The molten alloy with the temperature (PT) o...
متن کاملEVALUATION OFDISLOCATION STRUCTURE AND CRYSTALLITE SIZE IN WORN AL-SI ALLOY BY X-RAY DIFFRACTION
Abstract: powerful method for the characterization of microstructures of crystalline materials in terms of crystallite size anddislocation structures. In this paper the effect of the sliding on the microstructure of A356 in the as-cast and heattreated conditions are studied, The X-ray phase analysis shows that with increasing applied load, the dislocationdensity is increased, whereas the crysta...
متن کاملMICROSTRUCTURE OF A RAPIDLY SOLIDIFIED Al-4V-2Fe ULTRAHIGH STRENGTH ALUMINUM ALLOY
Microstructure of a rapidly solidified Al-4V-2Fe alloy has been examined in detail by means of transmission electron microscopy and atom probe field ion microscopy. It is composed of a mixture of α-Al and amorphous phases. α-Al grains are relatively large (400 nm), but nanoscale domains of amorphous phase are trapped in the fcc grains. The interface between the α-Al and amorphous phases are ver...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1993
ISSN: 0451-5994
DOI: 10.2464/jilm.43.606