CHARACTER OF EXPONENT IN AIR LEAKAGE CALCULATION By CRACK METHOD
نویسندگان
چکیده
منابع مشابه
A Fast Method for Calculation of Transformers Leakage Reactance Using Energy Technique
Energy technique procedure for computing the leakage reactance in transformers is presented. This method is very efficient compared with the use of flux element and image technique and is also remarkably accurate. Examples of calculated leakage inductances and the short circuit impedance are given for illustration. For validation, the results are compared with the results obtained using practic...
متن کاملPrediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملLeakage Calculation Through Clearances
Gas leakage tlow through small clearances is modeled using two-dimensional (2-D) and quasi one-dimensional {1-D) flow analysis. For 2-D approach, a dimensionless form of Navier-Stokes equations for two-dimensional, laminar, viscous and compressible fluids are employed to compute the det-·1iled tlow field across the clearance. The 2-D study also establishes that when clearance (0) is very small ...
متن کاملCalculation Submarine Hydrodynamic Coefficient by Hybrid Method
Increase in the accuracy of hydrodynamic coefficient calculation cause to increase in the prediction of vessel maneuvering ability. Different methods of determining hydrodynamic coefficients will be effective in determining the accuracy of coefficients, especially in numerical simulation. In this paper, we do planar motion mechanism (PMM) test, oblique towing test, and rotating arm test simulat...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1984
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.335.0_67