CHARACTERISTIC OF INTERFACE BIMETAL ALUMINUM-COPPER FOR BIMETAL BUSHING PRODUCED BY CENTRIFUGAL CASTING
نویسندگان
چکیده
منابع مشابه
Microstructure evolution and mechanical properties of Mo40/C93200 bimetal processed by compound casting process
Compound casting refers to a process that used to produce bimetals. This study investigates the interface of Mo40/C93200 that is produced by compound casting process. In this research, molten bronze is poured around steel core, interaction between liquid and solid creates a diffusion zone and followed by a transition layer which leads to the creation of diffused region between the interfaces of...
متن کاملBimetal friction stir welding of aluminum to magnesium
FSW material flow and phase transformation were studied at the interface of dissimilar welding of Al 6013 to Mg. Defect free butt weld was obtained when aluminum and magnesium test plates were placed in the advancing side and retreating side respectively, and the tool was placed 1 mm off the weld centerline into the aluminum side. In order to understand how the materials flow during FSW, steel ...
متن کاملTemperature Insensitive Curved Bimetal Elements
Space structures are subjected to appreciable temperature variations when they enter and leave direct solar radiation zones. These variations cause thermal strains and related structural distortions. Such deformations are often a nuisance and much engineering e ort, such as active control methods, is currently being invested in reducing the deformations and alleviating their e ects. This paper ...
متن کاملEffect of Cladding Parameters on the Hardness of Bimetal Plates
R.Bęczkowski, Institute of Mechanical Technology, Czestochowa University of Technology, Poland Hardness is one of the components responsible for the resistance to wear. The development of new materials with hardness surface more than 65 HRC is possible with use welding technologies. High chromium cored wires belong to welding materials that are often used to cladding to protect surface. This ar...
متن کاملUltrasonic Feature Imaging System for Testing Bimetal Rotor Clad Layer
An ultrasonic feature scan imaging system used for testing delamination flaw probably existing in the bimetal rotor clad layer was studied and developed. The bimetal rotor with nine column holes can be tested automatically. All the wave train of testing result will be saved in computer for post processing. There are various imaging modes including depth imaging and amplitude imaging, to find de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Slovaca
سال: 2021
ISSN: 1338-1156,1335-1532
DOI: 10.36547/ams.27.1.756